In the process of using the cylinder piston rod of the hydraulic station, if there is leakage, what measures should be taken to deal with it?

1. Reasonably plan and select the space fit between the piston rod and guide sleeve of the hydraulic cylinder. Under the condition of ensuring that the sealing ring will not be squeezed out of the safety belt space, the support ring should be used as far as possible to promote the cooperation between the two, and also to ensure the primary lubrication of the sealing lip. The first and most important thing is to avoid abnormal high temperature caused by friction.

2. The appearance of the hydraulic cylinder piston rod is properly maintained. Many people have certain knowledge about the collision of hydraulic cylinder piston rod, and manufacturers of various loaders have begun to pay more and more attention to the collision of hydraulic cylinder piston rod. Therefore, it is still necessary to maintain the earrings of the hydraulic cylinder piston rod, which can effectively reduce the collision probability of the hydraulic cylinder piston rod.

3. We can choose the dust ring of the inner lip. Dust collectors help to keep dust out.

4. Take corresponding maintenance measures for the painted dust ring of hydraulic cylinder and the whole machine. First of all, learn relevant foreign knowledge, add a special seal ring to the dust ring lip, which can not only be used to maintain paint and dust ring, but also remove the special seal ring after the entire painting.